Nexus 7 2 software update

This software update will be pushed to your device beginning February 8, Your device will notify you when it is ready to update. If your device has not received an OTA message, see "Update from the device," below.

New to T-Mobile? On this page: Identify the device's current software version Review software version details Determine update requirements Update software versions Issues after updating. Enter the fourth dimension. Listen Features Expansions Editions Buy now. Featuring three columns for easy navigation.

Counters for folders, categories, and presets to give you an overview at a glance. Color-coded tags, bookmarks, favorites, and a dedicated location for user presets. Arpeggiator Deluxe Access all sixteen layer arpeggiators, in addition to the main arpeggiator. Never lose track of what's happening with the fully interactive, zoomed-out overview at the top.

When zoomed in, the new "follow" option always scrolls with the playback. Editing has never been so comfortable. This is the best Arpeggiator you can find on the market! Effects Full visualization of the signal-flow for real-time feedback: You see what you hear and you hear what you see. On a device with dual supervisors, the active supervisor module cannot switch over to the standby supervisor module during the Cisco NX-OS software upgrade if you have an active configuration session.

On a device with a single supervisor module, the Cisco NX-OS software deletes the active configuration session without warning when you reload the device. Use the show configuration session summary command to verify that you have no active configuration sessions.

See the Release Notes document for the target upgrade release before starting the upgrade. Before attempting to use ISSU to upgrade to any software image version, follow these guidelines:. Schedule the upgrade when your network is stable and steady. Ensure that everyone who has access to the device or the network is not configuring the device or the network during this time. You cannot configure a device during an upgrade. Verify that sufficient space is available in the location where you are copying the images.

This location includes the active and standby supervisor module bootflash: internal to the device. Internal bootflash: has approximately MB of free space available. Avoid power interruption during any install procedure, which can corrupt the software image. Ensure that the device has a route to the remote server. The device and the remote server must be in the same subnetwork if you do not have a router to route traffic between subnets.

Ensure that the specified system and kickstart images are compatible with each other. If the kickstart image is not specified, the device uses the current running kickstart image. If you specify a different system image, ensure that it is compatible with the running kickstart image.

ISSU from 8. Multi-hop ISSU is not supported. If you are upgrading from any release other than the non-disruptive upgrade releases listed in the above table, a reload is required.

A major release train is considered to introduce significant new features, functions, and hardware platforms. Enter the show running-config aclmgr inactive-if-config command for all VDCs. Enter the clear inactive-config acl command for all VDCs. If the configuration has any mac packet-classify configurations on any interfaces, remove all of the configurations by entering the no mac packet-classify command. Because you might have your own configured CoPP policy and want to continue using it, the policy for the earlier release continues to be applied.

This action removes the previous policy and applies a new CoPP policy. Note that reapplying copp profile configuration removes CoPP momentarily on the chassis for the new configuration to take into effect. Hence, this needs to be done in a maintained environment. You can proceed with the upgrade only after you disable this feature. Shutdown vPC on the other peer that is still running 7. Optionally, a vPC role change can be performed to get the latest peer back to vPC primary.

The mount command enables you to mount a file from a source folder to a destination folder. Device config port-channel load-balance src-dst mac fex Non-ISSU upgrades are also referred to as cold boot upgrade. Enter the copy running-config startup-config vdc-all command.

Enter the reload command to reload the switch. Allow time after the reload for the configuration to be applied. Reload based NXOS downgrades involve rebuilding the internal binary configuration from the text-based startup configuration. This is done to ensure compatibility between the binary configuration and the downgraded software version.

As a result, certain specific configuration may be missing from the configuration, after downgrade, due to ASCII replay process. Furthermore, NX-OS configurations that require VDC or switch reload to take effect may require additional reload when applied during the downgrade process.

Any features introduced in a release must be disabled before downgrading to a release that does not support those features. When manually downgrading from a Cisco NX-OS Release to an earlier release, first power down all modules that are unsupported in the downgrade image. There is no warning displayed or prevention for the reload upgrade. Therefore make sure to remove RISE configuration before the reload upgrade.

The only way to recover from this condition is to do a reload ascii on the switch. If you copy the running configuration to a file and apply this configuration at a later point, including after a switch reload, the VLANs will not be restored.

Copy the VTP data file to the bootflash: data file by entering the copy vtp-datafile bootflash: vtp-datafile command. Copy the ASCII configuration to the startup configuration by entering the copy ascii-cfg-file startup-config command.

This limitation does not apply to a binary configuration, which is the recommended approach, but only to an ASCII configuration.

The command might be required when you change the module type of a VDC. The limit-resource module-type commands listed in the ASCII configuration file requires that rebind interfaces command be executed.

Manually enter the rebind interfaces command wherever needed to the ASCII configuration file for replay. Enter the rebind interfaces command immediately after you enter the limit-resource module-type command. If you boot up the switch without any startup configuration, this limitation might apply to an ASCII replay. The reason is that without a startup configuration, the default VDC might still have certain interfaces automatically allocated.

Because of this possibility, follow the approaches to work around the limitation. Instructions provided below list the steps for the cold boot non-ISSU downgrade.

The example provided below is for a cold boot downgrade for the following:. Enter copy running-config startup-config vdc-all command to save the boot variable. The stored upgrade history types are:. The output displays any upgrade activity that previously occurred on the switch and defines the start and end times for each event.

The following is an example output of the show upgrade history command:. Skip to content Skip to search Skip to footer. Book Contents Book Contents. Find Matches in This Book. PDF - Complete Book 2. Updated: December 21, Note Another type of binary file is the software maintenance upgrade SMU package file.

Note Cisco also provides electronic programmable logic device EPLD image upgrades to enhance hardware functionality or to resolve known hardware issues. Figure 1. Parallel Upgrade Process for Cisco Nexus Series Switches The steps for the parallel upgrade process on Cisco Nexus Series switches are: First the supervisors are upgraded This procedure requires a switchover.

The user also has the option to choose a serial upgrade using the CLI. Note The minimum requirement for a modular Cisco Nexus Series switch undergoing ISSU is two supervisors, two system controllers, and two fabric modules. See the following sample configuration for more information: switch config boot mode lxc Using LXC boot mode Please save the configuration and reload system to switch into the LXC mode. Note In-service software downgrades ISSDs , also known as nondisruptive downgrades, are not supported.

Do not use the Nexus series compressed image on Nexus series The following limitation applies to software upgrades from 7. User can change vrrpv3 timers to seconds or fine tune these timers based on upgrade time on all Vrrp Peers to avoid Vrrp State transitions. User can change vrrp timers to seconds or fine tune these timers based on upgrade time on all Vrrp Peers to avoid Vrrp State transitions.

Schedule the upgrade when your network is stable and steady. In general, ISSUs are supported for the following: From a major release to any associated maintenance release.

From the last two maintenance releases to the next two major releases. From an earlier maintenance release to the next two major releases. Please wait. Upgrade Paths Upgrading from a 7. Upgrade Paths to Release 9. Caution Failing to follow this procedure could require console access in order to recover the switch after the upgrade. Note These patches are only for upgrading. Performing runtime checks. Warning: please do not remove or power off the module at this time.

Copyright C American Megatrends, Inc. Loading IGB driver Installing SSE module Checking all filesystems Installing default sprom values Configuring network Installing LC netdev Installing psdev Installing veobc Installing OBFL driver The command 'guestshell' may be used to access it, 'guestshell destroy' to remove it. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under their own licenses, such as open source.

This software is provided "as is," and unless otherwise stated, there is no warranty, express or implied, including but not limited to warranties of merchantability and fitness for a particular purpose. Software BIOS: version Before you begin Before you enable the LXC mode, ensure that the installed licenses do not include the string in the license file.

Procedure Command or Action Purpose Step 1 configure terminal Example: switch configure terminal switch config Enters global configuration mode. Step 4 copy running-config startup-config Example: switch config copy running-config startup-config Saves the running configuration to the startup configuration. Step 5 reload Example: switch config reload This command will reboot the system. Note If an error message appears during the upgrade, the upgrade will fail because of the reason indicated.

Procedure Step 1 Read the release notes for the software image file for any exceptions to this upgrade procedure. Step 2 Log in to the device on the console port connection. Step 3 Ensure that the required space is available for the image file to be copied.

Step 4 If you need more space on the active supervisor module, delete unnecessary files to make space available. Step 8 Copy the software image to the active supervisor module using a transfer protocol. Copy complete. Note Software image compaction is only supported on Cisco Nexus series platform switches. Default upgrade is not hitless By default, the software upgrade process is disruptive.

Step 11 Save the running configuration to the startup configuration. Note When you use install all with no-reload option, the saved configuration cannot be used before you reload the device. Note If you enter the install all command without specifying a filename, the command performs a compatibility check, notifies you of the modules that will be upgraded, and confirms that you want to continue with the installation.

If you choose to proceed, it installs the NX-OS software image that is currently running on the switch and upgrades the BIOS of various modules from the running image, if necessary. Step 13 Optional Display the entire upgrade process. Note In vPC topologies, the two peer switches must be upgraded individually. The compatibility checks display the impact of the upgrade. The installation proceeds or not based on the upgrade impact. The current state is saved.