Backsplash install kitchen

Move your sponge in all directions to remove the layer of dust efficiently. Apply the caulk where the countertop meets the wall and where the cabinets meet the wall.

This reduces the risk of grout cracking. Use outlet spacers to extend your outlet past the tile. Before you go, keep reading for a few more helpful tips on installing your backsplash. Start tiling your kitchen backsplash in the center of the wall.

Starting in the center helps you ensure that your tiles are symmetrical. That may look unprofessional. To find the center point, use a tape measure. First, measure the full length of the wall behind your stove. Cut that length in half and you have your center point. When installing a backsplash, line up the grout lines in your backsplash tiles and countertop.

It will make the cooking area look finished and professional. Tiling a backsplash corner often involves cutting tiles into smaller pieces.

A wet tile saw works great to cut all types of backsplash tiles. As you approach the corner, measure each empty area where a piece of a tile will go on your wall. Then take that measurement and line it up against your tile.

Make a mark where you need to make your cut and then cut the tile. Your tiles are five inches long. So you will want to cut two inches off one of your tiles to tile the backsplash corner properly. We hope that your installation goes smoothly. Be sure to check out the video at the beginning of the article if you get stuck on any step. Good luck! Is a backsplash necessary in a kitchen? Table of Contents. December 16, Once the walls are dry, measure the area you want to cover and draw a stopping point on the wall to show where the tiles should stop.

Then, peel the backing off your tiles and stick them to the wall, beginning at the bottom. Continue sticking tiles to your wall until you've covered the entire area, cutting them to size if necessary. For tips on how to keep your backsplash clean, read on! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers.

Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Related Articles.

Article Summary. Method 1. Get all of your supplies. Installing a traditional tile backsplash in your kitchen requires several different items. Make sure you are fully prepared before starting your project.

The materials you need to have prepared before you begin include your tile, tile adhesive, and grout. Make sure you have the necessary tools, including a notched trowel, tape measure, sponge, level, utility knife, and a tile cutter. You may need spacers for tiles that are not attached together in sections.

You may want to use something to cover your countertops during this process to keep them clean. Clean your walls. In order for the tile adhesive to stick the walls, they must be free of any dust or grease. Wipe them down with a damp rag, and give enough time for them to completely dry. Measure your space. It is important to make sure you get a good measurement so you know exactly what size you should cut your tiles.

Make sure that you have enough tiles to fill the measured space, as well as a few extras for precaution. Use a level and straight edge to mark your stopping point along the wall.

Apply the tile adhesive. Use your trowel to smooth the tile adhesive across the wall, working in small sections. If you apply too much at once, it will begin to dry before you get a chance to attach the tiles. Firmly attach your tiles. Press them into the tile adhesive on the wall, using a level to make sure they are even.

Push them a few times to make sure they are secured to the wall. Wiggle the tile a little bit against the wall to ensure suction with the adhesive. Completely cover your wall. Attach all remaining tiles to your wall using this method, until you reach the edges.

Before you stick your tiles to the edges of the wall, cut off any excess or oddly shaped corners to make sure the fit is perfect. Any empty spaces can be filled with pieces of spare tile you cut to size with your tile cutter or utility knife. Apply grout. Use your cleaned trowel to spread grout evenly across the tiles. You will remove the unnecessary grout later. Allow a few minutes for the grout to set, and then use a damp sponge to clean off excess grout.

All of the cracks between the tiles should be filled, while the remaining tiles should be cleaned of all unnecessary grout.

Wipe down tiles. After the grout has completely dried, clean it off again with a dry cloth. Seal your tiles. If you want, you can apply a grout sealant to help protect your tiles. Add a small line of silicone caulk to the bottom edge of your tile to seal out water and prevent mildew growth.

Enjoy your new tile backsplash! Once you have completed all the installation steps, managing your new backsplash is easy.

Wipe it down occasionally with a generic kitchen or glass cleaner to keep your backsplash looking its best. Method 2. Gather your supplies.